LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Touch Select 2-4 And High-Low System (VF2CM) - Diagnostic Codes & Circuit Tests) >> Touch Select 2-4 And High-Low System >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication With Vehicle Dynamics Control Module [08/2019 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2024 Toyota 4Runner, 2023 Toyota 4Runner, 2022 Toyota 4Runner, 2021 Toyota 4Runner, and 2020 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When the data in the ECM and skid control ECU (master cylinder solenoid) is being overwritten, a message is displayed on the multi-information display and the indicator light rapidly blinks due to the 4 wheel drive control ECU detecting a communication malfunction (blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)), but this is not a malfunction.
  • Clear all DTCs, since DTCs are stored after the data in the ECM or skid control ECU (master cylinder solenoid) is overwritten.
scientia non olet · About LEMON Manuals