LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft / Propeller Shaft - Service Information >> PROPELLER SHAFT ASSEMBLY (for 2WD) >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

  1. INSTALL PROPELLER SHAFT ASSEMBLY 
    1. Remove SST from the extension housing.
      • SST: 09325-40010 
    2. Install the propeller shaft assembly to the extension housing.
    3. Align the matchmarks on the propeller shaft flange and differential flange.
    4. Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

      Torque: 88 N.m (899 kgf/cm, 65 ft.lbf) 

scientia non olet · About LEMON Manuals