LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2016 >> 4Runner Limited, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft / Propeller Shaft - Service Information >> Front Propeller Shaft Assembly >> Installation [08/2015 - ] >> Procedure

Installation [08/2015 - ]: Procedure

  1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY 
    1. Align the matchmarks on the yoke and differential flange.
    2. Install the propeller shaft assembly with the 4 washers, 4 bolts and 4 nuts.

      Torque: 88 N.m (899 kgf/cm, 65 ft.lbf) 

    3. Align the matchmarks on the yoke and transfer flange.
    4. Install the propeller shaft assembly with the 4 washers and 4 nuts.

      Torque: 88 N.m (899 kgf/cm, 65 ft.lbf) 

  2. INSTALL FRONT EXHAUST PIPE 
    1. Install the front exhaust pipe (Refer to INSTALLATION [08/2015 - ] ).
scientia non olet · About LEMON Manuals