DTC C1337: Diameter of the Tire is not Uniform [08/2015 - 08/2019]: Procedure
- CHECK TIRES
- Check the size and condition of all 4 wheels (Refer to INSPECTION [08/2015 - ]
).
HINT:
The DTC is output when tire deformation or a difference in tire size is detected.
OK
The diameter and air pressure of all 4 tires are the same.
Result:
NG
REPLACE TIRES SO THAT ALL 4 TIRES ARE SAME SIZE
Result:
OK
See step 2
- Check the size and condition of all 4 wheels (Refer to INSPECTION [08/2015 - ]
).
- RECONFIRM DTC
- Clear the DTC (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).
- Start the engine.
- Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.
- Check if the same DTC is recorded (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019]
).RESULT
Result Proceed to DTC C1337 is output A DTC C1337 is not output B
Result:
A
REPLACE BRAKE ACTUATOR ASSEMBLY
(Refer to REMOVAL [08/2015 - 08/2019] )
Result:
B
USE SIMULATION METHOD TO CHECK
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] )