DTC C0500-3A: Left Front Wheel Speed Sensor Signal Has Too Many Pulses; DTC C0506-3A: Right Front Wheel Speed Sensor Signal Has Too Many Pulses [08/2019 - ]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [08/2019 - ]

2. Turn the ignition switch off.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [08/2019 - ]

   Result

   Result	Proceed to
   DTCs is not output.	A
   DTCs is output.	B

Result: 

A 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] 

Result: 

B 

REPLACE FRONT SPEED SENSOR. Refer to  REMOVAL [08/2015 - ]