Caution / Notice / Hint

NOTE:

If the yaw rate and acceleration sensor (air bag sensor assembly) was replaced or reinstalled, perform "Calibration".

Refer to CALIBRATION [08/2019 - ]

HINT:

When U0125-87 and/or U0126-87 is output together with C0063-28 and/or C0063-96, inspect and repair the trouble areas indicated by U0125-87 and/or U0126-87 first.

Refer to DTC U0074-88: Control Module Communication Bus "B" Off Bus Off; DTC U0100-87: Lost Communication With ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0125-87: Lost Communication with Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message [08/2019 - ]