Speed Signal Circuit [07/2014 - ]: Description

• The meter CPU receives vehicle speed signals from this circuit. The vehicle speed sensor detects the voltage that varies according to the vehicle speed. The brake actuator assembly supplies power to the vehicle speed sensor. The brake actuator assembly detects vehicle speed signals based on the pulses of the voltage. The brake actuator assembly transmits vehicle speed signals as pulses to the meter CPU. A voltage of 12 V is output from the combination meter assembly and then input to the brake actuator assembly. The signal is changed to a pulse signal at the transistor in the combination meter assembly.
• A voltage of 12 V or 5 V is output from each ECU or relay and then input to the combination meter assembly.
• Each ECU controls the respective system based on the pulse signal.

HINT: 

This circuit is used for another system, and is not used for combination meter operation.