Typical Malfunction Thresholds
P2120
| Either of the following conditions is met | 1 or 2 |
| 1. Both of the following conditions are met | (a) and (b) |
| (a) VPA voltage | 0.4 V or less |
| (b) VPA2 voltage - Learned VPA2 accelerator off position voltage | 0.04 V or higher |
| 2. VPA voltage | 4.8 V or higher |
P2122
| All of the following conditions are met | (a) and (b) |
| (a) VPA voltage | 0.4 V or less |
| (b) VPA2 voltage - Learned VPA2 accelerator off position voltage | 0.04 V or higher |
P2123
| VPA voltage | 4.8 V or higher |
P2125
| Either of the following conditions is met | 1 or 2 |
| 1. All of the following conditions are met | (a) and (b) |
| (a) VPA2 voltage | 1.2 V or less |
| (b) VPA voltage - Learned VPA accelerator off position voltage | 0.04 V or higher |
| 2. VPA2 voltage when VPA voltage 0.4 to 3.45 V | 4.8 V or higher |
P2127
| All of the following conditions are met | (a) and (b) |
| (a) VPA2 voltage | 1.2 V or less |
| (b) VPA voltage - Learned VPA accelerator off position voltage | 0.04 V or higher |
P2128
| VPA2 voltage when VPA voltage 0.4 to 3.45 V | 4.8 V or higher |
P2138
| Either of the following conditions is met | Condition A or B |
| Condition A | - |
| Difference between VPA and VPA 2 voltages | 0.02 V or less |
| Condition B | - |
| VPA voltage | 0.4 V or less |
| VPA2 voltage | 1.2 V or less |