DTC U023A: Lost Communication with Front Camera Module [11/2014 - ]: Procedure

CHECK FOR DTC
1. Clear the DTCs. Refer to DTC CHECK / CLEAR [11/2014 - ] .
2. Check for DTCs. Refer to DTC CHECK / CLEAR [11/2014 - ] .
  OK
  
  DTC U023A is not output.
NG → See step 2

OK → See step 3
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2014 - ]
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2014 - ]