Installation [08/2014 - ]
- INSTALL TRIP SWITCH (w/o Headup Display)
- Engage the 2 claws to install the trip switch.
- INSTALL TRIP SWITCH (w/ Headup Display)
- Engage the 4 claws to install the trip switch.
- INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH . Refer to INSTALLATION [08/2014 - ] - Step 28
- INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION [08/2014 - ] - Step 30
- INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY . Refer to INSTALLATION [08/2014 - ] - Step 31