DTC P321F-319: Part of HV Gate Blocking Range/Performance [12/2014 - ]: Procedure

CHECK DTC OUTPUT (HYBRID CONTROL)

Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

Check if DTCs are output.

Result

Result	Proceed to
P321E-318 is not output.	A
P321E-318 is also output.	B

Turn the ignition switch off.

B → See step 3

A → See step 2

REPLACE INVERTER WITH CONVERTER ASSEMBLY. Refer to COMPONENTS [12/2014 - ]
GO TO DTC CHART (P321E-318). Refer to DTC P321E-318: All HV Gate Blocking Range/Performance [12/2014 - ]