LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Prius C One >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Testing and Diagnosis >> Hybrid Control System (Diagnostic Codes (P2511-149 - U0424-537) & Circuit Tests) >> Hybrid Control System >> DTC P2532-772: Ignition Switch Run Position Circuit High [12/2014 - ] >> Inspection Procedure

Inspection Procedure

HINT: 

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

  1. Turn the ignition switch to ON (IG) and wait for 15 seconds or more.
  2. Turn the ignition switch off and wait for 30 seconds or more.
scientia non olet · About LEMON Manuals