Loud Rattle from Hybrid Vehicle Transmission [12/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON (IG).
3. Turn the Techstream on.
4. Enter the following menus: Power train / Engine and ECT / Data List / ISC Learning.
5. Read the display on the Techstream.

   Result

   Tester Display	Result	Proceed to
   ISC Learning	Incmpl	A
   	Compl	B

6. Turn the ignition switch off.

B → See step   3 

A: Go to next step 

1. Initialize the learned values and perform idle learning. Refer to INITIALIZATION [12/2014 - ] .
2. Confirm that the idle speed is within the standard range.

   Standard

   Engine Idle Speed: 950 to 1050 rpm

3. Turn the ignition switch off.

NG → See step   3 

OK → END