DTC P0A1B-198: Drive Motor "A" Control Module [12/2014 - ]: Description
The MG ECU located in the inverter with converter assembly monitors its internal operation and it will set DTCs when it detects malfunctions. If any of the following DTCs are output, replace the inverter with converter assembly.
HINT:
The term "drive motor A" indicates MG2.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0A1B | 198 | MG ECU internal malfunction R/D converter NM stop error (1 trip detection logic) |
Inverter with converter assembly |