LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Highlander XLE, FWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> REAR CENTER SEAT OUTER BELT ASSEMBLY (for Rear No. 1 Seat) >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY 
    1. Install the rear No. 1 seat center lap type belt assembly with the bolt and nut.

      Bolt 

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

      Nut 

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

  2. INSTALL REAR SEAT SHOULDER BELT COVER RH 
    1. Engage the 2 claws and guide as shown in the illustration to install the rear seat shoulder belt cover RH.
      GTY450417Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL BELT PROTECTOR 
    GTY439386Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Wrap the seat belt webbing of the rear No. 1 seat center lap type belt assembly over the rear seat shoulder belt cover RH.
    2. Engage the 4 claws as shown in the illustration to install the belt protector.
      GTY450416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL REAR SEATBACK COVER WITH PAD 

    Refer to PROCEDURE - Step 19 , or refer to PROCEDURE - Step 20

  5. INSTALL REAR SEAT SHOULDER BELT COVER 

    Refer to PROCEDURE - Step 20 , or refer to PROCEDURE - Step 21

  6. INSTALL SEAT BELT ANCHOR COVER CAP 

    Refer to PROCEDURE - Step 21 , or refer to PROCEDURE - Step 22

  7. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY 

    Refer to PROCEDURE - Step 22 , or refer to PROCEDURE - Step 23

  8. INSTALL REAR NO. 1 SEAT COVER BEZEL 

    Refer to PROCEDURE - Step 23 , or refer to PROCEDURE - Step 24

  9. INSTALL REAR SEATBACK LOCK STRIKER COVER 

    Refer to PROCEDURE - Step 24 , or refer to PROCEDURE - Step 25

  10. INSTALL NO. 2 RECLINING REMOTE CONTROL LEVER KNOB 

    Refer to PROCEDURE - Step 25 , or refer to PROCEDURE - Step 26

  11. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY 

    Refer to PROCEDURE - Step 26 , or refer to PROCEDURE - Step 27

  12. INSTALL REAR SEATBACK COVER RH 

    Refer to PROCEDURE - Step 27 , or refer to PROCEDURE - Step 28

  13. INSTALL REAR SEATBACK COVER 

    Refer to PROCEDURE - Step 28 , or refer to PROCEDURE - Step 29

  14. INSTALL REAR SEAT CUSHION COVER WITH PAD 

    Refer to PROCEDURE - Step 31 , or refer to PROCEDURE - Step 33

  15. CONNECT REAR NO. 1 SEAT CENTER LAP TYPE BELT ASSEMBLY 
    1. Connect the anchor of the rear No. 1 seat center lap type belt assembly with the bolt.
      GTY453861Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protruding Part

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

      NOTE:

      Do not allow the anchor part of the rear No. 1 seat center lap type belt assembly to overlap the protruding part of the seatback frame.

  16. INSTALL REAR SEAT HINGE COVER 

    Refer to PROCEDURE - Step 33 , or refer to PROCEDURE - Step 40

  17. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 34 , or refer to PROCEDURE - Step 41

  18. INSTALL REAR NO. 1 SEATBACK LOCK STRIKER COVER 

    Refer to PROCEDURE - Step 35 , or refer to PROCEDURE - Step 42

  19. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE 

    Refer to PROCEDURE - Step 36 , or refer to PROCEDURE - Step 43

  20. INSTALL REAR SEAT COVER CAP 

    Refer to PROCEDURE - Step 37 , or refer to PROCEDURE - Step 44

  21. INSTALL NO. 1 REAR SEAT CENTER ARMREST PLATE 

    Refer to PROCEDURE - Step 42 , or refer to PROCEDURE - Step 49

  22. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY 

    Refer to PROCEDURE - Step 43 , or refer to PROCEDURE - Step 50

  23. INSTALL CENTER ARMREST HINGE COVER RH 

    Refer to PROCEDURE - Step 44 , or refer to PROCEDURE - Step 51

  24. INSTALL REAR SEAT INNER BELT ASSEMBLY 

    See step  1 , or see step  1

  25. INSTALL REAR SEAT REAR CUSHION MOULDING RH 

    Refer to PROCEDURE - Step 39 , or refer to PROCEDURE - Step 46

  26. INSTALL REAR NO. 1 SEAT ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ]

scientia non olet · About LEMON Manuals