LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Highlander XLE, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System (Service Information) (Except Hybrid) (2 Of 2) >> Rear Air Conditioning Panel >> Removal [12/2013 - ] >> Procedure

Removal [12/2013 - ]: Procedure

  1. REMOVE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY 
    1. Apply protective tape around the No. 2 air conditioning control assembly.
      GTY445298Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Using a molding remover, disengage the 7 claws to disconnect the No. 2 air conditioning control assembly.
    3. Disconnect the connector to remove the No. 2 air conditioning control assembly.
scientia non olet · About LEMON Manuals