LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Highlander XLE, FWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake (Service Information) (Except Hybrid) >> Parking Brake Switch >> Installation [12/2013 - ] >> Procedure

Installation [12/2013 - ]: Procedure

  1. INSTALL PARKING BRAKE SWITCH ASSEMBLY 
    1. Install the parking brake switch assembly to the parking brake control pedal assembly with the screw.

      Torque: 3.19 N*m (33 kgf*cm, 28 in.*lbf) 

  2. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY 

    Refer to INSTALLATION [12/2013 - ] 

scientia non olet · About LEMON Manuals