LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Highlander XLE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) - Service Information - (Except Hybrid) >> Rear Light Assembly >> Disassembly [11/2016 - ] >> Procedure

Disassembly [11/2016 - ]: Procedure

  1. REMOVE BACK-UP LIGHT BULB 
    1. Turn the back-up light socket with the back-up light bulb as shown in the illustration to remove them as a unit.
      GTY721112Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the back-up light bulb from the back-up light socket.
  2. REMOVE BACK-UP LIGHT SOCKET 
  3. REMOVE REAR LIGHT GASKET 
    1. Remove the rear light gasket.
      GTY721111Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Be sure to remove all traces of the old rear light gasket from the vehicle body.
      • Do not reuse the removed rear light gasket. Be sure to install a new rear light gasket to prevent water ingress.
  4. REMOVE REAR LIGHT PROTECTOR 
    1. Remove the rear light protector.
      GTY721110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Be sure to remove all the traces of the old rear light protector from the vehicle body.
      • Do not reuse the removed rear light protector. Be sure to install a new rear light protector to prevent water ingress.
scientia non olet · About LEMON Manuals