LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Highlander LE Plus, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> Rear No. 2 Seat Inner Belt Assembly >> Removal [11/2016 - ] >> Procedure

Removal [11/2016 - ]: Procedure

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY 

    Refer to REMOVAL [11/2016 - ]

  2. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY (for LH Side) 
    1. Disengage the 2 clamps.
      GTY710587Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fastener
    2. Disengage the 2 fasteners.
    3. Remove the rear No. 2 seat inner belt sub-assembly from the rubber band of the rear seat cushion assembly as shown in the illustration.
      GTY688639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Rubber Band
  3. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY RH (for RH Side) 
    1. Disengage the 2 clamps.
      GTY726942Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fastener
    2. Disengage the 2 fasteners.
    3. Disconnect the connector.
    4. Remove the rear No. 2 seat inner belt assembly RH from the rear seat cushion assembly as shown in the illustration.
      GTY726778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals