DTC P0011-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure; DTC P0021-07: Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure [11/2016 - ]: Description

WARNING: This page is about a different car, the 2019 Toyota Highlander, 2018 Toyota Highlander, and 2017 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DTC P0010-13.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory	Note
P0011-07	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure	10° CA or greater camshaft timing gear assembly (bank 1) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).	Cam timing oil control solenoid assembly (for intake camshaft of bank 1) Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 1]) Camshaft timing gear assembly (bank 1) ECM	Comes on	DTC stored	SAE Code: P0011 DTC for Mexico Models: - Applies
P0021-07	Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 2 Mechanical Failure	10° CA or greater camshaft timing gear assembly (bank 2) run-out maintained for 0.6 seconds or longer for 2 times (1 trip detection logic).	Cam timing oil control solenoid assembly (for intake camshaft of bank 2) Camshaft timing gear bolt (camshaft timing oil control valve assembly [for intake camshaft of bank 2]) Camshaft timing gear assembly (bank 2) ECM	Comes on	DTC stored	SAE Code: P0021 DTC for Mexico Models: - Applies