Removal [12/2013 - 11/2016]: Procedure

Refer to REMOVAL [12/2013 - 11/2016]

1. Disengage the 2 wire harness clamps.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disconnect the 6 ignition coil assembly connectors.
3. Remove the 6 bolts and 6 ignition coil assemblies from the cylinder head cover sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A	for Bank 2
   *B	for Bank 1

   NOTE:

   If an ignition coil assembly has been struck or dropped, replace it.

   HINT: 

   Arrange the removed parts in the correct order.

1. Remove the 6 spark plugs from the cylinder head sub-assembly.
   NOTE:

   If a spark plug has been struck or dropped, replace it.

   HINT: 

   Arrange the removed parts in the correct order.