Typical Malfunction Thresholds

Condition (A) 

• Any two of the following conditions are met:	Conditions 1, 2 and 3
  1. One of the following condition is met:	Conditions (a), (b) or (c)
  (a). P position switch	ON
  (b). N position switch	ON
  (c). Park neutral position switch (NSW)	ON
  2. R position switch	ON
  3. D position switch	ON

Condition (B) 

• When all conditions below are met:

  P position switch	OFF
  N position switch	OFF
  Park neutral position switch (NSW)	OFF
  R position switch	OFF
  D position switch	OFF

Condition (C) 

• When shift lever is in S position, one of the following conditions is met:

  P position switch	ON
  N position switch	ON
  Park neutral position switch (NSW)	ON
  R position switch	ON