LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Camry LE >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System (Diagnostic Codes & Circuit Tests) (Except Hybrid) >> Tire Pressure Warning System >> DTC C2141/41: Transmitter ID1 Error; DTC C2142/42: Transmitter ID2 Error; DTC C2143/43: Transmitter ID3 Error; DTC C2144/44: Transmitter ID4 Error [09/2014 - ] >> Inspection Procedure

Inspection Procedure

NOTE:
  • When replacing the tire pressure warning ECU and receiver, read the transmitter IDs stored in the old ECU using the Techstream and write them down before removal.
  • w/ Tire Inflation Pressure Display Function:

    It is necessary to perform initialization. Refer to INITIALIZATION [09/2014 - ] after registration. Refer to REGISTRATION [09/2014 - ] of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU and/or one of the valve and transmitters has been replaced.

  • w/o Tire Inflation Pressure Display Function:

    It is necessary to perform registration. Refer to REGISTRATION [09/2014 - ] of the transmitter IDs into the tire pressure warning ECU and receiver if the ECU and/or one of the valve and transmitters has been replaced.

  • When replacing the tire pressure warning ECU and receiver on vehicles equipped with the wireless door lock control system (w/o smart key system), be sure to perform Registration of Recognition Code to register the transmitter IDs after ECU replacement. Refer to REGISTRATION [09/2014 - ] .
scientia non olet · About LEMON Manuals