LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Camry LE >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System (Diagnostic Codes & Circuit Tests) (Except Hybrid) >> Tire Pressure Warning System >> Circuit Tests >> Tire Position Not Identified [09/2014 - ] >> Inspection Procedure

Inspection Procedure

NOTE:

It is necessary to perform initialization. Refer to INITIALIZATION [09/2014 - ] after registration. Refer to REGISTRATION [09/2014 - ] of the transmitter IDs into the tire pressure warning ECU and receiver if one of the valve and transmitters has been replaced.

HINT: 

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

scientia non olet · About LEMON Manuals