DTC B1800/51: Short in Driver Side Squib Circuit; DTC B1801/51: Open in Driver Side Squib Circuit; DTC B1802/51: Short to GND in Driver Side Squib Circuit; DTC B1803/51: Short to B+ in Driver Side Squib Circuit [09/2014 - ]: Description
WARNING: This page is about a different variant/trim than selected.
The driver side squib circuit consists of the airbag sensor assembly, spiral cable with sensor sub-assembly and horn button assembly.
The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the driver side squib circuit.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1800/51 |
- The airbag sensor assembly receives a line short circuit signal in the driver side squib circuit during primary check.
- Spiral cable with sensor sub-assembly malfunction
- Driver side squib malfunction
- Airbag sensor assembly malfunction
|
- Instrument panel wire
- Spiral cable with sensor sub-assembly
- Horn button assembly (Driver side squib)
- Airbag sensor assembly
|
| B1801/51 |
- The airbag sensor assembly receives an open circuit signal in the driver side squib circuit.
- Spiral cable with sensor sub-assembly malfunction
- Driver side squib malfunction
- Airbag sensor assembly malfunction
|
| B1802/51 |
- The airbag sensor assembly receives a short circuit to ground signal in the driver side squib circuit.
- Spiral cable with sensor sub-assembly malfunction
- Driver side squib malfunction
- Airbag sensor assembly malfunction
|
| B1803/51 |
- The airbag sensor assembly receives a short circuit to B+ signal in the driver side squib circuit.
- Spiral cable with sensor sub-assembly malfunction
- Driver side squib malfunction
- Airbag sensor assembly malfunction
|