Reassembly [09/2014 - ]

HINT: 

• Use the same procedure for the RH side and LH side.
• The following procedure is for the LH side.

1. INSTALL BACK-UP LIGHT BULB 
   1. Install the back-up light bulb to the back-up light socket plug.
   2. Turn the back-up light socket plug with the back-up light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.
      Fig 1: Identifying Back-Up Light Socket Plug With Back-Up Light Bulb

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL REAR LIGHT GASKET 
   1. Engage the 2 guides and 2 claws to install a new rear light gasket.
      Fig 2: Identifying Guides And Claws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL REAR COMBINATION LIGHT PROTECTOR 
   1. Install a new rear combination light protector.
      Fig 3: Identifying Rear Combination Light Protector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002