LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Camry LE >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Automatic Headlight Beam Level Control System (Exterior) (Diagnostic Codes & Circuit Tests) (Except Hybrid) >> Automatic Headlight Beam Level Control System >> DTC B2416: Height Control Sensor Malfunction [09/2014 - ] >> Inspection Procedure

Inspection Procedure

NOTE:

If either of the following is performed, initialization of the headlight leveling ECU assembly is necessary. Refer to INITIALIZATION [09/2014 - ] .

  • Replacement of the headlight leveling ECU assembly.
  • Replacement or removal/installation of the rear height control sensor sub-assembly or work that changes the vehicle height such as replacement of suspension components.
scientia non olet · About LEMON Manuals