DTC C2176/76: Receiver Error [10/2014 - ]: Procedure

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Turn the engine switch off.
3. Turn the engine switch on (IG) and check for DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   OK

   DTC C2176/76 is not output.

Result: 

OK 

END 

Result: 

NG 

REPLACE TIRE PRESSURE WARNING ECU AND RECEIVER 

(Refer to REMOVAL [10/2014 - ] )