LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon XLE >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belts (Service Information) (Except Hybrid) >> Rear Seat Inner Belt Assembly >> On-Vehicle Inspection [10/2014 - ] >> Procedure

On-Vehicle Inspection [10/2014 - ]: Procedure

  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Vehicle not Involved in Collision) 
    1. Visually check for defects on the rear seat inner with center belt assembly LH installed on the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the rear seat inner with center belt assembly LH
        • Small cracks on the rear seat inner with center belt assembly LH
        • Significant discoloration on the rear seat inner with center belt assembly LH

        OK

        No defects are found.

        HINT: 

        If any of the defects are found, replace the rear seat inner with center belt assembly LH with a new one.

  2. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH (for Vehicle Involved in Collision) 
    1. Visually check for defects on the rear seat inner with center belt assembly LH removed from the vehicle.
      1. The defects to be checked are as follows:
        • Cuts on the rear seat inner with center belt assembly LH
        • Small cracks on the rear seat inner with center belt assembly LH
        • Significant discoloration on the rear seat inner with center belt assembly LH
        • Cracks or other damage on the connector

        OK

        No defects are found.

        HINT: 

        If any of the defects are found, replace the rear seat inner with center belt assembly LH with a new one.

scientia non olet · About LEMON Manuals