How To Proceed With Troubleshooting [10/2014 - ]: Procedure

Result: 

NEXT 

See step  2

1. Interview the customer to confirm the trouble (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] or HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] ).

Result: 

NEXT 

See step  3

1. Measure the battery voltage.

   Standard Voltage

   11 to 14 V

   If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result: 

NEXT 

See step  4

1. Refer to Problem Symptoms Table (Refer to PROBLEM SYMPTOMS TABLE [10/2014 - ] ).

   Result

   Result	Proceed to
   Fault is not listed in Problem Symptoms Table	A
   Fault is listed in Problem Symptoms Table	B

Result: 

B 

See step  6

Result: 

A 

See step  5

1. Terminals of ECU (Refer to TERMINALS OF ECU [10/2014 - ] )
2. On-vehicle Inspection (Refer to ON-VEHICLE INSPECTION [10/2014 - ] )

Result: 

NEXT 

See step  6

Result: 

NEXT 

See step  7

Result: 

NEXT 

END