Radio Receiver Assembly Communication Stop Mode [10/2015 - ]: Description

Detection Item	Symptom	Trouble Area
Radio Receiver Assembly Communication Stop Mode	Either condition is met: "Display and Navigation (AVN1)" is not displayed on the CAN Bus Check screen of the Techstream Refer to PROBLEM SYMPTOMS TABLE [10/2015 - ] Communication system DTCs (DTCs that start with U) that correspond to "Radio Receiver Assembly Communication Stop Mode" in "DTC Combination Table" are output Refer to DIAGNOSIS SYSTEM [10/2015 - ]	Radio and display receiver assembly branch line or connector Power source circuit of radio and display receiver assembly Radio and display receiver assembly ground circuit Radio and display receiver assembly