DTC C168D: Vehicle Information Unmatched [10/2014 - ]: Procedure

1. Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.
   1. Rear television camera assembly optical axis adjustment (back camera position setting) (Refer to CALIBRATION [10/2014 - ] ).
   2. Steering angle setting (Refer to CALIBRATION [10/2014 - ] ).

Result: 

NEXT 

See step  2

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Recheck for DTCs and check that no DTCs are output (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   HINT: 

   • If DTC C168D is output, perform the procedure to register the vehicle information into the rear television camera assembly.
   • If DTC C168D is still output after performing the procedure to register the vehicle information into the rear television camera assembly 3 times, replace the rear television camera assembly.

   Result

   Result	Proceed to
   DTC C168D is output	A
   DTC C168D is not output	B

Result: 

A 

REPLACE REAR TELEVISION CAMERA ASSEMBLY 

(Refer to REMOVAL [10/2014 - ] )

Result: 

B 

END