LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2015 >> Avalon Hybrid Limited >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Warning System (Service Information) (Hybrid) >> Tire Pressure Warning Receiver >> Installation [10/2014 - ] >> Procedure

Installation [10/2014 - ]: Procedure

  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER 
    1. Connect the connector to the tire pressure warning ECU and receiver.
    2. Engage the 2 tabs into the holes to temporarily install the tire pressure warning ECU and receiver.
    3. Install the bolt.
  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH 

    Refer to PROCEDURE - Step 22 . Refer to PROCEDURE - Step 24

  3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 30 . Refer to PROCEDURE - Step 32

  4. INSTALL REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 31 . Refer to PROCEDURE - Step 33

  5. INSTALL REAR SEAT ASSEMBLY 

    (Refer to INSTALLATION [10/2014 - ] )

  6. REGISTER TRANSMITTER ID 

    (Refer to REGISTRATION [10/2014 - 10/2015] or REGISTRATION [10/2015 - ] )

  7. INSPECT TIRE PRESSURE WARNING SYSTEM 

    (Refer to TEST MODE PROCEDURE [10/2014 - ] )

  8. PERFORM INITIALIZATION 

    (Refer to INITIALIZATION [10/2014 - 10/2015] or INITIALIZATION [10/2015 - ] )

scientia non olet · About LEMON Manuals