Installation [10/2014 - ]: Procedure
- INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
- Engage the guide and install the child restraint seat tether anchor bracket with the bolt.
Torque: 20 N*m (199 kgf*cm, 14 ft.*lbf)
HINT:
Use the same procedure for the other 2 child restraint seat tether anchor brackets.
- Engage the guide and install the child restraint seat tether anchor bracket with the bolt.
- INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY
See step 4
- INSTALL REAR SEAT SHOULDER BELT HOLE COVER
See step 5
- INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
Refer to PROCEDURE - Step 22 . Refer to PROCEDURE - Step 24
- INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
See step 7
- INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
See step 1
- CONNECT REAR SEAT OUTER BELT ASSEMBLY LH
See step 10
- CONNECT REAR SEAT OUTER BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
- INSTALL REAR SEAT SIDE GARNISH LH
Refer to PROCEDURE - Step 23 . Refer to PROCEDURE - Step 25
- INSTALL REAR SEAT SIDE GARNISH RH
HINT:
Use the same procedure as for the LH side.
- INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
Refer to PROCEDURE - Step 30 . Refer to PROCEDURE - Step 32
- INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
Refer to PROCEDURE - Step 40 . Refer to PROCEDURE - Step 42
- INSTALL REAR DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 31 . Refer to PROCEDURE - Step 33
- INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
- INSTALL REAR SEAT ASSEMBLY
Refer to INSTALLATION [10/2014 - ]