DTC C1A50: Brake System Malfunction [10/2015 - ]: Description
When the pre-collision system is operating, the driving support ECU assembly sends brake control signals to the skid control ECU (brake booster with master cylinder assembly).
When the driving support ECU assembly receives a electronically controlled brake system malfunction signal from the skid control ECU (brake booster with master cylinder assembly) via CAN communication, DTC C1A50 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1A50 | Brake System Malfunction | While the power switch is on (IG), the driving support ECU assembly receives a electronically controlled brake system malfunction signal from the skid control ECU (brake booster with master cylinder assembly) for 0.3 seconds or more. |
|