DTC P0A78-202: Drive Motor "A" Inverter Performance [10/2014 - 10/2015]: Procedure
- CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG2)
See step 12
Result:
NG
See step 4
Result:
OK
See step 2
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
NEXT
See step 3
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check the other DTCs that were output together with DTC P0A78-202.
Result
DTC No. Relevant Diagnosis P0A78-113, 128, 284, 286, 287, 505, 506, 806, 807, 808 Drive Motor "A" Inverter Performance NOTE:DTC P0A78-202 is stored after DTCs P0A78-113, 128, 284, 286, 287, 505, 506, 806, 807 and/or 808 are stored. After troubleshooting and repairing the malfunction which caused DTC P0A78-202 to be stored, be sure to troubleshoot all the other DTCs.
NEXT
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] )
- Check the other DTCs that were output together with DTC P0A78-202.
- REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
NEXT
See step 5
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
NEXT
See step 6
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check the other DTCs that were output together with DTC P0A78-202.
Result
DTC No. Relevant Diagnosis P0A78-113, 128, 284, 286, 287, 505, 506, 806, 807, 808 Drive Motor "A" Inverter Performance NOTE:DTC P0A78-202 is stored after DTCs P0A78-113, 128, 284, 286, 287, 505, 506, 806, 807 and/or 808 are stored. After troubleshooting and repairing the malfunction which caused DTC P0A78-202 to be stored, be sure to troubleshoot all the other DTCs.
NEXT
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] )
- Check the other DTCs that were output together with DTC P0A78-202.