DTC P1606-308: Collision has been detected or Collision Sensor Connection (Open); DTC P1606-317: Collision has been detected or Collision Sensor Connection (Open) [10/2014 - 10/2015]: Procedure
- CHECK VEHICLE FOR COLLISION DAMAGE
- Check the vehicle condition.
Result
Result Proceed to The vehicle is not damaged. A The vehicle is damaged. B
Result:
B
REPAIR VEHICLE
Result:
A
See step 2
- Check the vehicle condition.
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
- Check for DTCs.
Result
Result Proceed to P1606 only is output. A P0A1D is output. B - Turn the power switch off.
Result:
B
GO TO DTC CHART (P0A1D)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] )
Result:
A
See step 3
- CHECK AIRBAG SYSTEM
- Troubleshoot the airbag system (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015]
).
Result
Result Proceed to The system is normal. A There is a malfunction in the system. B
Result:
B
REPAIR MALFUNCTIONING PARTS, COMPONENT AND AREA
Result:
A
See step 4
- Troubleshoot the airbag system (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015]
).
- CHECK INFORMATION CODE
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
- Access the freeze frame data of DTC P1606 and read the INF code.
Result
Result Proceed to INF code 308 is output. A INF code 317 is output. B - Turn the power switch off.
Result:
A
REPLACE AIRBAG ECU ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
Result:
B
See step 5
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
- Check for DTCs.
Result
Result Proceed to One or two of the following conditions are met. A All of the following conditions are met. B DTC Output Status P3107-213 or P3107-214 is output. U0151-763 is output. U0110-160 or U0110-657 is output. - Turn the power switch off.
Result:
A
REPLACE POWER MANAGEMENT CONTROL ECU
(Refer to COMPONENTS [10/2014 - 10/2015] )
Result:
B
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] )