DTC P1606-308: Collision has been detected or Collision Sensor Connection (Open); DTC P1606-317: Collision has been detected or Collision Sensor Connection (Open) [10/2014 - 10/2015]: Description
The power management control ECU receives a signal that indicates a collision from the airbag ECU assembly to detect a collision. After detecting a collision, the power management control ECU shuts off the high voltage systems for safety.
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P1606 | 308 | Shutoff signal from the airbag ECU assembly is determined. |
|
| 317 | A collision is determined due to a wiring malfunction. |
|
HINT:
If P1606-308 or 317 is output, the hybrid system cannot be started unless the DTCs are cleared using the Techstream.