DTC P0C30-390: Hybrid Battery Pack State of Charge High [10/2014 - 10/2015]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
4. Check for DTCs.

   Result

   Result	Proceed to
   P0C30-390 only is output.	A
   DTCs except P0C30-390 are output.	B

5. Turn the power switch off.

Result: 

A 

REPLACE POWER MANAGEMENT CONTROL ECU 

(Refer to COMPONENTS [10/2014 - 10/2015] )

Result: 

B 

GO TO DTC CHART (HYBRID CONTROL SYSTEM) 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] )