DTC P0A0F-204: Engine Failed to Start; DTC P0A0F-205: Engine Failed to Start; DTC P0A0F-206: Engine Failed to Start; DTC P0A0F-524: Engine Failed to Start; DTC P0A0F-525: Engine Failed to Start [10/2015 - ]: Procedure
- CHECK DTC OUTPUT (ENGINE AND ECT)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
- Check for DTCs.
- Turn the power switch off.
NEXT
GO TO DTC CHART (SFI SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2015 - 10/2016] , DIAGNOSTIC TROUBLE CODE CHART [10/2016 - 06/2017] , or DIAGNOSTIC TROUBLE CODE CHART [06/2017 - ] )