DTC P321F-319: Part of HV Gate Blocking Range/Performance [10/2014 - ]: Procedure
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
- Check for DTCs.
Result
Result Proceed to P321E-318 is not output. A P321E-318 is also output. B - Turn the power switch off.
A
REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
B
GO TO DTC CHART (P321E-318)
(Refer to DTC P321E-318: ALL HV GATE BLOCKING RANGE/PERFORMANCE [10/2014 - 10/2015] or DTC P321E-318: ALL HV GATE BLOCKING RANGE/PERFORMANCE [10/2015 - ] )