DTC P3147-240: Transmission system; DTC P3147-242: Transmission system [10/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
4. Check for DTCs.

   Result

   Result	Proceed to
   P3147-240 or P3147-242 only is output.	A
   P0A1D is also output.	B

5. Turn the power switch off.

A 

REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY 

(Refer to COMPONENTS [10/2014 - ] )

B 

GO TO DTC CHART (P0A1D) 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] or DIAGNOSTIC TROUBLE CODE CHART [10/2015 - ] )