Loud Rattle from Hybrid Vehicle Transmission [10/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Data List / ISC Learning.
5. Read the display on the Techstream.

   Result

   Tester Display	Result	Proceed to
   ISC Learning	Incmpl	A
   	Compl	B

6. Turn the power switch off.

Result: 

B 

GO TO PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [10/2014 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] )

Result: 

A 

See step  2

1. Initialize the learned values and perform idle learning (Refer to INITIALIZATION [10/2014 - ] ).
2. Confirm that the idle speed is within the standard range.

   Standard

   Engine Idle Speed: 950 to 1050 rpm

3. Turn the power switch off.

Result: 

OK 

END 

Result: 

NG 

GO TO PROBLEM SYMPTOMS TABLE 

(Refer to PROBLEM SYMPTOMS TABLE [10/2014 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] )