DTC P0A7A-203: Generator Inverter Performance [10/2015 - ]: Procedure
- CHECK HYBRID VEHICLE TRANSAXLE ASSEMBLY (MG1)
Refer to PROCEDURE - Step 11
Result:
NG
See step 4
Result:
OK
See step 2
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
NEXT
See step 3
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check the other DTCs that were output together with DTC P0A7A-203.RESULT
DTC No. Relevant Diagnosis P0A1A-517 Generator Control Module P0A4C-518 Generator Position Sensor Circuit Range/Performance P0A7A-122, 322, 324, 325 Generator Inverter Performance NOTE:DTC P0A7A-203 is stored after any of DTCs P0A1A-517, P0A4C-518, P0A7A-122, 322, 324 and 325 are stored. After troubleshooting and repairing the malfunction which caused DTC P0A7A-203 to be stored be sure to troubleshoot all the other DTCs.
NEXT
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2015 - ] )
- Check the other DTCs that were output together with DTC P0A7A-203.
- REPLACE HYBRID VEHICLE TRANSAXLE ASSEMBLY
When Not Using the Engine Support Bridge: Refer to COMPONENTS [10/2014 - ]
When Using the Engine Support Bridge: Refer to COMPONENTS [10/2015 - ]
NEXT
See step 5
- REPLACE INVERTER WITH CONVERTER ASSEMBLY
(Refer to COMPONENTS [10/2014 - ] )
NEXT
See step 6
- CHECK DTC OUTPUT (HYBRID CONTROL)
- Check the other DTCs that were output together with DTC P0A7A-203.RESULT
DTC No. Relevant Diagnosis P0A1A-517 Generator Control Module P0A4C-518 Generator Position Sensor Circuit Range/Performance P0A7A-122, 322, 324, 325 Generator Inverter Performance NOTE:DTC P0A7A-203 is stored after any of DTCs P0A1A-517, P0A4C-518, P0A7A-122, 322, 324 and 325 are stored. After troubleshooting and repairing the malfunction which caused DTC P0A7A-203 to be stored be sure to troubleshoot all the other DTCs.
NEXT
GO TO DTC CHART (HYBRID CONTROL SYSTEM)
(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2015 - ] )
- Check the other DTCs that were output together with DTC P0A7A-203.