DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [10/2015 - ]: Description
WARNING: This page is about a different car, the 2018 Toyota Avalon, 2017 Toyota Avalon, and 2016 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
If forward recognition camera learning are not performed after installing the forward recognition camera, DTC C1AA9 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1AA9 | Front Camera Module Beam Axis Not Adjusted | 2 seconds after the power switch is turned on (IG), the forward recognition camera detects that forward recognition camera learning have has not been completed. | Forward recognition camera |