DTC P0111: Intake Air Temperature Sensor Gradient Too High [10/2014 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.
   RESULT
   
   

   Result	Proceed to
   DTC P0111 and other DTCs are output	A
   DTC P0111 is output	B

   HINT: 

   • If any DTCs other than P0111 are output, troubleshoot those DTCs first.
   • Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly (Refer to INITIALIZATION [10/2014 - ] ).

Result: 

A 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 10/2015] or DIAGNOSTIC TROUBLE CODE CHART [10/2015 - 10/2016] or DIAGNOSTIC TROUBLE CODE CHART [10/2016 - 06/2017] or DIAGNOSTIC TROUBLE CODE CHART [06/2017 - ] )

Result: 

B 

REPLACE MASS AIR FLOW METER SUB-ASSEMBLY 

(Refer to REMOVAL [10/2014 - ] )