Typical Malfunction Thresholds
P0011: Advanced Camshaft Timing (Case 1)
| Both Of The Following Conditions Are Met | - |
| Deviation Of Actual Valve Timing And Target Valve Timing | More Than 5°Ca (Crankshaft Angle) For 5 Seconds Or More After The Vvt Hold Duty Ratio Learned Value Reaches The Upper Or Lower Limit. |
| Valve Timing | No Change At Advanced Valve Timing |
P0011: Advanced Camshaft Timing (Case2)
| Valve Timing | 80°Ca Or More |
| Engine | Stall |
P0012: Retarded Camshaft Timing
| Both Of The Following Conditions Are Met | - |
| Deviation Of Actual Valve Timing And Target Valve Timing | More Than 5°Ca (Crankshaft Angle) For 5 Seconds Or More After The Vvt Hold Duty Ratio Learned Value Reaches The Upper Or Lower Limit. |
| Valve Timing | No Change At Retarded Valve Timing |
- If The Difference Between The Target And Actual Camshaft Timing Is Greater Than The Specified Value, The ECM Operates The Camshaft Timing Oil Control Valve Assembly For 10 Seconds By Applying And Releasing Oil Pressure. Then, The ECM Monitors The Camshaft Timing Change For 10 Seconds.