Inspection [10/2014 - ]: Procedure
- INSPECT HIGH PITCHED HORN ASSEMBLY
- Apply auxiliary battery voltage and check the operation of the high pitched horn assembly according to the table below.
OK
Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal A4-1
Auxiliary battery negative (-) → Body groundHorn sounds TEXT IN ILLUSTRATION*a Component without harness connected
(High Pitched Horn Assembly)If the result is not as specified, replace the high pitched horn assembly.
- Apply auxiliary battery voltage and check the operation of the high pitched horn assembly according to the table below.
- INSPECT LOW PITCHED HORN ASSEMBLY
- Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the table below.
OK
Measurement Condition Specified Condition Auxiliary battery positive (+) → Terminal A1-1
Auxiliary battery negative (-) → Body groundHorn sounds TEXT IN ILLUSTRATION*a Component without harness connected
(Low Pitched Horn Assembly)If the result is not as specified, replace the low pitched horn assembly.
- Apply auxiliary battery voltage and check the operation of the low pitched horn assembly according to the table below.