DTC C1451/72: Motor Drive Permission Malfunction [10/2014 - ]: Procedure

1. Check that the brake fluid level is sufficient.

   OK

   Brake fluid level is sufficient.

   HINT: 

   • If the fluid level drops, check for fluid leaks, and repair as necessary.
   • If no fluid leaks exist, add and adjust the fluid level (Refer to ON-VEHICLE INSPECTION [10/2014 - ] ).

Result: 

NG 

CHECK AND REPAIR BRAKE FLUID LEAKS OR ADD FLUID 

Result: 

OK 

See step  2

1. Bleed the air from the brake system (Refer to BLEEDING [10/2014 - ] ).

   HINT: 

   If air bleeding has been performed, this DTC will be cleared.

Result: 

NEXT 

See step  3

1. Check if the same DTC is output (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   Result

   Result	Proceed to
   DTC C1451/72 is output.	A
   DTC C1451/72 is not output.	B

Result: 

B 

END 

Result: 

A 

See step  4

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

Result: 

NEXT 

END