DTC C1442/44: Invalid Data Received from Acceleration Sensor; DTC C1443/34: Invalid Data Received from Yaw Rate Sensor [10/2014 - ]: Procedure

1. Clear the DTCs (Refer to DTC CHECK / CLEAR [10/2014 - ] ).
2. Check if the same DTC is output (Refer to DTC CHECK / CLEAR [10/2014 - ] ).

   Result

   Result	Proceed to
   DTCs C1442/44 and C1443/34 are not output.	A
   DTCs C1442/44 and/or C1443/34 are output.	B

Result: 

A 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 10/2015] or HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )

Result: 

B 

REPLACE AIRBAG ECU ASSEMBLY 

(Refer to REMOVAL [10/2014 - ] )